|
|||
Modem on PBX Phone System Help?Q. I am attempting to use the modem in our pc in the office. I believe our phone system is called a PBX system and I am not sure what kind of adapter we need to use, if any. The phones themselves have 5 lines that you can choose from by pressing the corresponding button. One phone line goes into the phone. 1. Please advise on what kind of hardware is needed to use the modem on this kind of phone setup. 2. Do we disconnect the phone line from the phone and plug it directly into the modem? Or do we disconnect the handset and connect a line there to plug in to the modem? 3. If we are to disconnect the line from the phone and plug it into the modem directly, how do we choose the telephone line for the modem to use? A. Most modems will work behind a PBX (or a PABX), as long as the user can get an outside dialtone from the phone without the PABX operator's intervention. The line should go into the modem from the wall socket and then from the modem to the telephone. If the system has a multi-pair cable going to the handset (a lot do with five lines), you'll need to get a separate line installed from the PABX for the modem. It doesn't matter which line is separate.This can even be done at the block where the multi-pair line comes into the office. To use the modem, in the setup, you need to specify what number(s) need to be pushed to get the outside line, if any. Thus done, you should be in business. If you'd bother to READ the ORIGINAL post (rather than getting argumenative, as usual), you'd have seen that the original author specified a "PBX" system. The likelyhood of this being a "digital" system is diminimous. Second, a "digital" system will NOT fry the modem. It won't work, but that's a LONG was from "frying". If you knew anything about telephony, you'd know that the current in the line itself would NEVER fry a modem. But, no, you DIDN'T bother to read the original post. Also, most of the largest corporations that have digital switches also have digital lines to the CO (why be stupid enough to have digital internals, switch to analog, switch back to digital in the CO, etc., or do you think that COs today are analog?). Therefore, if the company had a pure digital system, there wouldn't be a need for a modem AT ALL (modem = modulator/demodulator to switch from analog to digital and vica versa). A simple connector (adaptor) from the serial port to the digital phone line with appropriate software would be enough. However, as most telco "local loops" are still analog (without ordering special circuits from the phone company), so are most PABXs (or EPABX, etc.). But, as I started out, the author specified "PBX", NOT PABX nor EPABX, etc. Name me ONE brand of a "PBX" that is "digital".
Other Questions: I'm interested in purchasing a cell phone as my primary home phone and for use when I travel, as I always to due to the nature of my job. I need some advice on services, what to look for, etc. I don't want roaming fees, an expensive phone and... FS: 2line cordless phone system with 5 handsets ($ 300)Auto attendant - CyberGenie allows both your telephone lines to be customized with separate greetings and call routing options, along with business and non-business hours - helping separate your work life from your home life Speech User Interfa... Business Phone System Uk. Phone Technician Scam ?I got this in e-mail from a friend, who is passing it on to others, and I am sure received it the same way. Sounds like meat for this NG. Any thoughts?This (90#) was probably an internal function of some PABX, PBX, or Centrex-type system. Th... VoIP Based Telephone service for Small Business ?We are a small business with 5 tel. lines, 1 SDSL connection. I was approached by a VoIP vendor regarding a VoIP based product that would cut our phone bills by 1/2. I haven't looked at it yet. I am just looking for the main advantages/drawback... Cordless phone problem ?I'm having a hard time finding a cordless phone that works properly in my house. I have a 25 channel Panasonic that works great but the battery won't stay charged. I've tried about every 900 mhz and 2.4 Giga phone (Panasonic, Uniden, Sony, Tosh...
|
Ask a Question PFBlog Debt Help Computer Engineering Personal Budget Mechanical Engineering Credit Card Refinance Foreclosure |
||
|
Copyright 2005 Finance Q&A |
|||